es hat eine der anderen platten erwischt
smartctl zeigt mal wieder keine fehler
URL: https://www.overclockers.at/linux/md-raid5-recovery_252229/page_1 - zur Vollversion wechseln!
kann sich noch jemand an diesen thread erinnern? https://www.overclockers.at/storage...as-jetzt_240782
es hat eine der anderen platten erwischt
smartctl zeigt mal wieder keine fehler
wie würdet ihr weiter verfahren? so schnell wie es geht eine ersatzplatte rein und rebuilden? versuchen das raid mit 3 platten als read only zu mounten und sicherungen ziehen? die alte platte testen und falls es gut geht (was eher unwahrscheinlich sein dürfte) einen rebuild riskieren?Code:smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-36-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, [url]www.smartmontools.org[/url] === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD30EFRX-68AX9N0 Serial Number: WD-WCC1T1263163 LU WWN Device Id: 5 0014ee 2b3588b96 Firmware Version: 80.00A80 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Oct 9 22:10:53 2018 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (39540) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 397) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x70bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 3839 3 Spin_Up_Time 0x0027 189 176 021 Pre-fail Always - 5508 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 31 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 039 039 000 Old_age Always - 44535 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 30 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 16 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 14 194 Temperature_Celsius 0x0022 113 103 000 Old_age Always - 37 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 375 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 3 200 Multi_Zone_Error_Rate 0x0008 200 199 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 20553 - # 2 Short offline Completed without error 00% 20530 - # 3 Short offline Completed without error 00% 20506 - # 4 Extended offline Completed without error 00% 20492 - # 5 Short offline Completed without error 00% 20481 - # 6 Short offline Completed without error 00% 20458 - # 7 Short offline Completed without error 00% 20434 - # 8 Short offline Completed without error 00% 20410 - # 9 Short offline Completed without error 00% 20386 - #10 Short offline Completed without error 00% 20362 - #11 Short offline Completed without error 00% 20338 - #12 Extended offline Completed without error 00% 20325 - #13 Short offline Completed without error 00% 20314 - #14 Short offline Completed without error 00% 20290 - #15 Short offline Completed without error 00% 20266 - #16 Short offline Completed without error 00% 20242 - #17 Short offline Completed without error 00% 20218 - #18 Short offline Completed without error 00% 20194 - #19 Short offline Completed without error 00% 20170 - #20 Extended offline Completed without error 00% 20156 - #21 Short offline Completed without error 00% 20146 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Code:server@homeserver:~$ sudo mdadm --examine /dev/sd[abcd]1 >> raid.status mdadm: only give one device per ARRAY line: <ignore> and /dev/md/0 mdadm: No md superblock detected on /dev/sdb1. server@homeserver:~$ cat raid.status /dev/sda1: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 38c6ec9d:66fb4bfb:4045343f:7df0d971 Name : localhost.localdomain:0 Creation Time : Mon Sep 9 09:43:02 2013 Raid Level : raid5 Raid Devices : 4 Avail Dev Size : 5860268032 (2794.39 GiB 3000.46 GB) Array Size : 8790400512 (8383.18 GiB 9001.37 GB) Used Dev Size : 5860267008 (2794.39 GiB 3000.46 GB) Data Offset : 262144 sectors Super Offset : 8 sectors Unused Space : before=262064 sectors, after=1024 sectors State : clean Device UUID : 1210f5ff:16254505:d1bbc6a3:3e9ae35f Update Time : Tue Oct 9 20:31:55 2018 Checksum : 771b1cd1 - correct Events : 39665 Layout : left-symmetric Chunk Size : 512K Device Role : Active device 0 Array State : AAAA ('A' == active, '.' == missing, 'R' == replacing) /dev/sdc1: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 38c6ec9d:66fb4bfb:4045343f:7df0d971 Name : localhost.localdomain:0 Creation Time : Mon Sep 9 09:43:02 2013 Raid Level : raid5 Raid Devices : 4 Avail Dev Size : 5860268032 (2794.39 GiB 3000.46 GB) Array Size : 8790400512 (8383.18 GiB 9001.37 GB) Used Dev Size : 5860267008 (2794.39 GiB 3000.46 GB) Data Offset : 262144 sectors Super Offset : 8 sectors Unused Space : before=262064 sectors, after=1024 sectors State : clean Device UUID : 10351ce1:c10425d1:395944e5:1ddaca3e Update Time : Tue Oct 9 20:31:55 2018 Checksum : 4486fec4 - correct Events : 39665 Layout : left-symmetric Chunk Size : 512K Device Role : Active device 2 Array State : AAAA ('A' == active, '.' == missing, 'R' == replacing) /dev/sdd1: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 38c6ec9d:66fb4bfb:4045343f:7df0d971 Name : localhost.localdomain:0 Creation Time : Mon Sep 9 09:43:02 2013 Raid Level : raid5 Raid Devices : 4 Avail Dev Size : 5860268032 (2794.39 GiB 3000.46 GB) Array Size : 8790400512 (8383.18 GiB 9001.37 GB) Used Dev Size : 5860267008 (2794.39 GiB 3000.46 GB) Data Offset : 262144 sectors Super Offset : 8 sectors Unused Space : before=262064 sectors, after=1024 sectors State : clean Device UUID : 13a0e327:c25d2525:d04159a1:37586378 Update Time : Tue Oct 9 20:31:55 2018 Checksum : d4fc2979 - correct Events : 39665 Layout : left-symmetric Chunk Size : 512K Device Role : Active device 3 Array State : AAAA ('A' == active, '.' == missing, 'R' == replacing) server@homeserver:~$
Wenn du einen rebuild machst dann imho nur gleich mit neuer Platte.Zitat aus einem Post von wergordie alte platte testen und falls es gut geht (was eher unwahrscheinlich sein dürfte) einen rebuild riskieren?
habe das raid gerade wieder online gebacht, mit 3 von 4 platten (active, degraded). morgen kommt die neue festplatte.
muss das raid zum rebuild unmounted werden?
mWn nicht, das ist ja der grund für raid, dass die verfügbarkeit erhöht wird. es wird langsamer sein aber sollte weiterhin funktionieren
overclockers.at v4.thecommunity
© all rights reserved by overclockers.at 2000-2025