No more POST! HELP Memory timing changed!

Seite 1 von 1 - Forum: Mainboards auf overclockers.at

URL: https://www.overclockers.at/mainboards/no_more_post_help_memory_timing_changed_109643/page_1 - zur Vollversion wechseln!

Giggerf schrieb am 13.03.2004 um 21:47

Hi!

I get a D875PBZLK desktop Mainboard. I changed the memory setup for 5-3-2-2. This setting should be OK for the OCZ PC3200 Platinum Edition. Anyway, the PC does'nt POST anymore. I get nothing on the monitor; the l.e.d. light stay yelow not green. According to the reference guide there is 3 modes with the bios configuration setting jumper.

1- Normal (default): bios use the current configuration
2- Configure: After POST the bios show thw maintenance menu. clearing password.
3- Recovery: The bios recover data from a recovery diskette in the event of a failed bios update.

I don't get a recovery diskette and the PC doesn't post! Wath should i do? Remove the CMOS battery?

NEED your help

Tank you

Erklärbär schrieb am 13.03.2004 um 21:51

CMOS Clear should help.

freq schrieb am 13.03.2004 um 21:52

bios reset first ...if this wont work remove the bios batt for few hours .....

Giggerf schrieb am 13.03.2004 um 21:56

Wich mode do i have to use?? How do i reset the bios!!

erlgrey schrieb am 13.03.2004 um 22:01

look at the manual of your mainboard ..
or just take out the bios battery
thats the bios reset.

Giggerf schrieb am 13.03.2004 um 22:07

There is nothing about resetting the bios in the manual but wath i've written. Is it a critical operation; removing the CMOS battery?

Erklärbär schrieb am 13.03.2004 um 22:10

No.
You only have to take it out.
Waite a few hours and put the Battery back.

Giggerf schrieb am 13.03.2004 um 23:12

OK! I will remove the CMOS and will post back.

TANKS

TheHackman schrieb am 14.03.2004 um 00:53

and turn the power off first before clearing the CMOS memory (removing the bios battery).