Problem mit Asrock K7VT4A+

Seite 1 von 1 - Forum: Mainboards auf overclockers.at

URL: https://www.overclockers.at/mainboards/problem_mit_asrock_k7vt4a_130718/page_1 - zur Vollversion wechseln!


pirate man schrieb am 28.11.2004 um 21:17

ich hab dieses wochenende 2 extakt gleiche rechner zambaut und hab bei beiden das gleiche problem
zuerst die komponenten: asrock k7vt4a+, sempron 2400+, 512mb ddr333 elixir - sollt eigentlich reichen
so, jetzt das problem: wenn ich im bios bei der fsb-auswahl auf "auto" geh hat die cpu 100fsb und die ram 133fsb, wenn ich manuell auf 166 umstell bleibt der screen schwarz und ich darf ein cmos clear machen
mich wundert das schon weil 1. sind die 166mhz ja standardtakt beim sempron und den ddr333 ram und 2. steht auf der mobo-schachtel noch groß "sempron ready" oben
ich hoff ihr könnts da helfen
thx


dilg schrieb am 28.11.2004 um 21:26

gehn cpu & ram bei 133 mhz fsb?
hast du auch schon in kleinen schritten den max.fsb ausgetestet?

probier mal deine mdt ram,vl liegst daran->zurück zum händler




edit: google war so nett und hat mir beim 1sten link noch folgendes ausgespuckt:

Correction Notice K7VT4A+ FSB Jumper Setting Table on PCB R1.01 Silk Screen

Owing to PCB vender’s mistake in the production process, some of K7VT4A+ motherboards have incorrect FSB Jumper Setting Table on the PCB R1.01 silk screen. It will not cause any damage to your MB or CPU even if you follow this incorrect table to adjust the jumper setting. However, the system may not be able to boot properly if you use some of FSB 333 CPUs. If the PCB version of the MB you purchased is R1.01, please do not follow the FSB Jumper Setting Table on the PCB silk screen to adjust the FSB jumper setting. For correct information about the FSB jumper setting, please refer to the FSB Jumper Setting Table in the Quick Installation Guide bundled in the MB package. You can also find the correct FSB jumper setting table from below table or the user manual in ASRock Support CD.


The K7VT4A+
FSB Jumper position

The Correct K7VT4A+ FSB Jumper setting Table

The K7VT4A+ User manual download: http://www.asrock.com/Drivers/Manual/K7VT4A+_UM.pdf


pirate man schrieb am 28.11.2004 um 22:37

was bzgl. den jumpern is gut, thx
hab zwar am anfang gleich nach solchen jumpern gesucht, aber nicht gefunden
beim genaueren hinschaun seh ichs jetzt doch, werd morgen testen
danke daweil




overclockers.at v4.thecommunity
© all rights reserved by overclockers.at 2000-2025