URL: https://www.overclockers.at/pixelfreaks/neue-kameras_249359/page_92 - zur Vollversion wechseln!
Es ist aber nicht unüblich auch den Markennamen nur für eine Produktkategorie mit zu kaufen, auch wenn es das Unternehmen weiter gibt.
Bin auf deren erstes, eigenes Produkt gespannt.
Wenn Du an die Zukunft des verkauften Geschäfts glaubst, und keine Angst hast, dass das verkaufte Geschäft negativ auf Deine Marke abfärbt
IMHO: die nächsten 12 Monate werden wir noch neue Produkte aus der Olympus-Entwicklungs-Pipeline sehen, dann vielleicht noch ein paar "Refreshes" in "kostenoptimierten Prozessen" (da hat Olympus eh schon damit angefangen gehabt - mehr Plastik in den Bodies, etc.), und dann war es das.
JIP hat kein R&D, übernimmt es nicht von Olympus, und wird auch keines aufbauen. Die Objektivfabrik in Japan wird fix geschlossen (wobei die meisten Objektive eh schon im vietnamesischen Werk produziert wurden), das ist schon kommuniziert, und man plant Objektive zukünftig "zuzukaufen" (mit Glück bei Sigma, mit Pech bei irgendwelchen billigen Chinesen).
Da Panasonic ebenfalls einen Kurswechsel für M43 angedeutet (mittlerweile eigentlich nicht mehr nur angedeutet, sondern klar ausgesprochen) hat, ist die Zukunft für das System derzeit nicht rosig. Es sieht derzeit danach aus, dass man den Markt jetzt noch ein bisschen mit Marketing melken wird, neuen Zielgruppen das alte Zeug in neuer (Video-) Verpackung verkauft, aber es keine echte Weiterentwicklung mehr geben wird.
Ja ein nettes refresh, das genau so schon erwartet/geteasert wurde.
Die Preise sind für UVP erstaunlich gut, mal schauen wies im Sommer aussieht. Nikon hatte immer recht stabile Preise. Die Z Serie viel erstaunlich schnell und stark im Preis.
Auf Autofokus Vergleiche bin gespannt was sich getan hat
Vor allem die Z7 war im Preis ursprünglich auch sicher zu viel hoch angesetzt. Da hat die "Reife" und auch die Auswahl an nativen Objektiven noch gefehlt.
Mittlerweile ist das aber eine gut funktionierende Kamera, und wenn man beim AF nachbessern konnte, ist der neue Preis sicher attraktiv (spätestens bei der nächsten Halbjahres-Promotion).
Leider gab es kein Wort zum 24-105, das angeblich noch heuer vorgestellt und ab Jänner ausgeliefert werden soll. Ich hatte gehofft, dass man das vielleicht auch als Kit-Objektiv zu den neuen Kameras anbietet, und deshalb heute schon ankündigt.
Was geht dir an der Z6 ab, so dass dich nach der Z7 giert? Ich persönlich würd die Auflösung gar nicht merken, maximal bei Crop, hat aber auch Nachteile mit Lichtempfindlichkeit
Zitat aus einem Post von smashItdie hatten letztens doch erst eine rückrufaktion für die F6?
Zitat aus einem Post von ccrKeine Überraschungen. Fokus auf Video...
Zitat aus einem Post von Dune-Was geht dir an der Z6 ab, so dass dich nach der Z7 giert? Ich persönlich würd die Auflösung gar nicht merken, maximal bei Crop, hat aber auch Nachteile mit Lichtempfindlichkeit
Brauchen wir das nicht alle?Zitat aus einem Post von ccralles was ich brauche
ich dachte eigentlich auch, dass mikrojusterung des AF bei DSLM nicht mehr notwendig sind...hmmm..
Auch Nikon Z hat AF Tune. Es geht wohl darum, dass CDAF und PDAF eingesetzt werden, und des daher doch wieder zu Fehlfokussierungen kommen kann.
Ich muß aber ehrlich sagen, dass ich es bei Olympus bei nicht einer einzigen Linse erlebt hätte, und auch bei meinen Nikon Z Linsen kein Problem habe. Im Gegensatz zu den Zeiten, als ich noch mit Canon fotografiert habe und regelmäßig ins Servicecenter musste
https://blog.reikanfocal.com/2018/1...h-reikan-focal/
[quote]Why AF Fine Tune on the Nikon Z cameras?
As I said above, it’s generally assumed that cameras with the autofocus sensor built into the image sensor (i.e. mirrorless cameras) do not need any AF calibration. There’s no chance of the AF sensor being misaligned or the pre-programmed internal calibration between the AF sensor and image sensor to be incorrect like there is in a DSLR (which has a separate AF sensor in it’s base). However, Nikon has included AF Fine-Tune in their Z6 and Z7 cameras – so why is that, and is it really needed?
If the camera uses purely contrast-detect AF (CDAF), you wouldn’t need any sort of calibration. CDAF works in the same way as a human focusing a lens – you look at how sharp the image is, and if you’re not satisfied with the sharpness you move the focus point a bit in a random direction and see if it gets sharper or not. You repeat this process until you get a sharp image. This is a closed-loop, iterative process – closed loop means you adjust and then check your result, and iterative means you repeat the process until you’re happy with the outcome. The end focus position is probably about as good as you’re going to get (although you can never be quite sure as you have to adjust the lens to check, which might then mess up the focus!). The down sides are that CDAF is quite slow and requires good light.
Phase-detect AF (PDAF) looks at two paths of light coming to the sensor and with a single measurement can determine both the magnitude (how much you need to adjust the focus) and the direction (towards the camera or towards infinity). So one quick measurement can give you everything you need to know – then you drive the lens the right amount in the right direction and voila, perfect focus…
… not quite. This is an open-loop system. It’s fast, but it relies on your measurement being accurate and the lens doing exactly what you tell it to. When the camera says move x amount in this direction, it assumes that x is the perfect amount, and the lens will correctly move to this point.
So what happens if your lens motor/gearing is a bit worn and doesn’t behave quite the same as it did when it was new? What if the lens mount or lens elements are fractionally misaligned due to manufacturing tolerances or an accidental knock 6 months ago, and the focus isn’t measured quite correctly or the movement of the motor doesn’t quite move the lens element where is should be? These are the sorts of things can result in a fractional offset of the focus position, and an out-of-focus image.
But as long as the focus error is fairly consistent, then AF Fine Tune is your knight in shining armour to get that perfect focus back!
Other mirrorless cameras offering AF Calibration
There are a few other mirrorless cameras which offer AF tuning. Cameras like the Olympus OM-D E-M1 even have the capability to adjust calibration for each individual focus point!
I’ve consistently seen reference to Sony mirrorless support AF Fine-Tune but this isn’t technically correct and I wanted to clarify here. There are a few lens mount adapter available for Sony cameras, and at least 2 of them (LA-EA2 and LA-EA4) use Sony’s “Translucent Mirror” technology and incorporate a PDAF sensor in the base of the adapter. When you use AF Fine Tune on a Sony mirrorless, this adapter PDAF sensor is what you are actually calibrating, so it’s only of use if you’re using one of these specific adapters.[/quote]
edit: quote will nicht
Zitat aus einem Post von Viper780Justierung hat so wie die 5D IV, Sony a7 Serie und Olympus. Ich war ganz perplex warum man sowas bei einer DSLM hat. Die EOS R hat es jedenfalls nicht
Kann mir wer erklären warum Olympus und Sony da Mikrojustierung implementiert haben?
nette erklärung, aber es spricht doch nix dagegen mit PDAF nach dem Fokusieren nachzumessen obs eh passt und falls es solche abweichungen gibt diese automatisch in der Firmware on-the-fly zu kompensieren (reset beim nächsten Objektivwechsel).
Bei AF-C ohnehin auch notwendig dauernd nachzumessen.
Imho nicht notwendig diese alte Lösung in eine neue DSLM zu bringen wenn man bissl weiterdenkt.
Da ist wirklich ein Spiegel und eigener AF Sensor drinnen? (hab mir Bilder angesehen, also ja ich weiß dass es stimmt).
Warum macht man sowas? Wohin spiegelt der Spiegel das Bild?
Ich hab mal mein Sigma 100-400C an beide extreme per Dock verstellt und merke an der eos r keine Unterschiede (an der 7D II natürlich unscharf).
Jetzt wäre es interessant ein Canon Objektiv zu nehmen was nicht passt und das zu testen.
Der Erklärung von Reikan kann ich zwar folgen, aber so ganz verstehe ich es nicht.
overclockers.at v4.thecommunity
© all rights reserved by overclockers.at 2000-2024