URL: https://www.overclockers.at/prozessoren/sandy-bridge-e-ist-da_227265/page_2 - zur Vollversion wechseln!
Zitat von fliza231.7v in die 32nm cpu zu pumpen find ich sehr gut!
die max-multi/max-takt filzstift beschriftungen machen mich allerdings wieder weniger an. die werte sind ja eher ernüchternd.
ok ich nehme deine grafikkarten ab.^^
btw zuhause erwarten mich 2 neue 2600k. sucht for the win!!!
rofl, made my day!Zitat von Hamptibtw zuhause erwarten mich 2 neue 2600k. sucht for the win!!!
hwbot.org sammelt wieder alle verfügbaren BIOS-Versionen (inklusive Beta-BIOS!) und Batches.
Falls sich jemand von euch für den derzeit noch nicht erhältlichen Core i7-3930K interessiert: Ab nächster Woche sollte er beim DiTech endlich lagernd sein!
was wird er ca. kosten?
Kurzes und schönes Review .
Ich lass das hier mal so stehen:
ZitatOriginally Posted by Massman
FYI, I found there is a way to bin the CPU on air. I tested it with this CPU and it worked like I expected. What you need to do:
- go in bios and set all VRM config like you'd do for extreme OC
- run 2c2t (to save heat)
- set vcore to 1.55~1.6V
- set bclk to 100
Now, increase the CPU ratio. In the beginning, you will be able to boot straight in to OS. After a while, it will crash at OS loading (for W7, it will lock at the ball swinging moment), but when pressing the reset button, the board will reboot. This means it can run this frequency with better temps! Once you lock and pressing reset doesn't work, you've found the maximum frequency of your CPU.
In my case, I could always reset from lock-up upto 55x. With 56x, I could not reset and had to power off the entire setup. The end result was 5510MHz for my CPU under LN2.
ist ja eigentlich eh gleich wie beim "alten" sandy bridge.
na das vereinfacht das pretesten ja um ein vielfaches.
steht irgendwas, ob das auf allen boards (asus, gigabyte und co) so funktioniert, oder wird einfach davon ausgegangen, dass man das r4e hat?
normalerweise sollte die prozedur auf allen boards ziemlich gleich sein.
Zitat von massmanWith R4E I'm 100% sure it works. With the other boards, I'm not at all.
Mhhh weil ich grad am Testen bin mit meinem 3960X ... was sind denn "annehmbare" Air Temps für 24/7 bzw. Last?
Ich hab jetzt schon 2x den Kühler neu Montiert und hab grad ca. 82°C bei Prime unter 4,5GHz bei 1,320-1,328V (Last)
Kommt mir sehr hoch vor, für den geringen Vcore ... oder ist das normal dass der X so heizt? Ich glaub sonst geh ich nochmal kühler abmontieren
Edit.
Ahh.. ohne ULN Adapter gehen ~75°C (die Lautstärke is halt auch dementsprechend )
Edit2.
Hättet Ihr vielleicht noch Tipps für die max. 24/7 Spannungen unter Luft?
Aktuell siehts so aus, hab fast alles auf Auto, nicht dass da was vom Board zu hoch eingestellt wird (CPU PLL zu hoch?):
overclockers.at v4.thecommunity
© all rights reserved by overclockers.at 2000-2024