URL: https://www.overclockers.at/prozessoren/project_pentium_m_quotdothanquot_114894/page_7 - zur Vollversion wechseln!
Zitat von starfuckerDer E7501 ist normal auf Xeon Boards drauf.
http://www.intel.com/design/chipsets/e7501/
Aber kannst du da nicht evtl. nochmal nachfragen was das genau für ein Board war?
Hi, ich warte noch auf die Antwort.
Zwischenzeitlich mal die Aussage meiner Quelle:
Edit
Ist unmöglich !
Der Dothan hat 479 Pins
Der Chipsatz E7501 hat 604 Pin Sockel drauf.
Da sehe ich eine kleine inkompatibilität
Zitat von stylistHi, ich warte noch auf die Antwort.
Zwischenzeitlich mal die Aussage meiner Quelle:
"I have seen it on an Intel E7501 chipset and running fine before. ... It also benchmarks very fast....faster
than a 2.66Ghz P4 at times....must be due to the 2MB cache."
Zitat von MerenfreakIst unmöglich !
Der Dothan hat 479 Pins
Der Chipsatz E7501 hat 604 Pin Sockel drauf.
Da sehe ich eine kleine inkompatibilität
Hier das Datenblatt zum E7501:
ftp://download.intel.com/design/chi...ts/25192702.pdf
ZitatThe Intel® E7501 chipset is targeted for the server market, both front-end and general-purpose,
low- to mid-range. It is intended to be used with the Intel® Xeon™ processor with 512-KByte L2
cache and the Intel® Xeon™ processor with 533 MHz system bus. The Intel E7501 is also targeted
for the applied-computing market. It is intended to be used with the Intel® Pentium® M processor
with one Mbyte of L2 cache. The Intel E7501 chipset consists of three major components: the
Intel® E7501 Chipset Memory Controller Hub (MCH), the Intel® I/O Controller Hub 3-S
(ICH3-S), and the PCI/PCI-X 64-bit Hub 2.0 (P64H2). The MCH provides the processor system
bus interface, memory controller, hub interface for legacy I/O, and three high-performance hub
interfaces for PCI/PCI-X bus expansion.
Zitat von starfuckerHier das Datenblatt zum E7501:
ftp://download.intel.com/design/chi...ts/25192702.pdf
Ja, sehe ich auch, aber dann war es kein Serverboard.
Sucht mal weiter, ich schaue auch nach.
Hi,
so, folgende Information:
Edit
D.h. er läuft zusammen mit dem Chipsatz, aber ein Board mit passendem Sockel zu finden wird sehr schwer wenn nicht unmöglich. ?!
Nur was war das für ein Board auf dem dein Quelle den laufen hatte Irgend ein Prototyp?
Zitat von starfuckerD.h. er läuft zusammen mit dem Chipsatz, aber ein Board mit passendem Sockel zu finden wird sehr schwer wenn nicht unmöglich. ?!
Nur was war das für ein Board auf dem dein Quelle den laufen hatteIrgend ein Prototyp?
Glaub ich fast nicht. Dann bräuchte man doch auch noch ein angepasstes bios. Xeon und Dothan sind ja recht unterschiedlich
Hi,
dann verfolgen wir doch weiterhin das 855Board Thema.
mfg
Stylist
Hast du schon ne Antwort bekommen, was das für ein Board war?
najo des thema mim E7501 hatten wir ja schon.
was mich angeht wundert mih warum sollts in am "ältern" server board gehen. wie schauts mim E7505 chipsatz aus der wäre ja für desktop und workstation. und auch da i875 is a weitereintwicklung der E700x serie
hat wer bei powerleap angefragt?
wenns an adaper gibt dann vo denen.
overclockers.at v4.thecommunity
© all rights reserved by overclockers.at 2000-2025