Was is das für ein ding?!

Longbow

Here to stay

Registered: Feb 2003
Location: Homeoffice
Posts: 5568

21.11.2003 - 11:28

also ich hab auf ebay auch eine mb kuriosität gefunden;

laut beschreibung müsste man ja einen katmai und noch eine cumine reinpappen können; müssen die dann auf dem selben fsb laufen? schon oder.

http://cgi.ebay.de/ws/eBayISAPI.dll...;category=23162

Pedro

Vereinsmitglied
-------------------------

Registered: May 2000
Location: Europe
Posts: 3908

21.11.2003 - 12:15

The P6BXT-A+ is a full-sized ATX board measuring 305x220mm and using 4-layer printed circuit board. The P6BXT-A+ has a special design feature so that it includes a Slot-1 processor slot and a PPGA (Plastic Pin Grid Array) Celeron Socket-PGA370 processor socket. This feature means that you can install the mainboard with either a Pentium-III cartridge, a Pentium-II cartridge, the SEPP (Single Edge Processor Package) Celeron cartridge, or one of the new generation PPGA Celeron cartridges. In addition, the mainboard supports a 66 MHz memory bus, or a 100 MHz memory bus, so you can use inexpensive 66MHz memory chips, or higher-performance PC-100 memory chips. The board is installed with an integrated PCI-3D sound system and has a full suite of I/O ports. Seven expansion slots are available for system development and hardware monitoring is supported. This board allows complete flexibility. System integrators can choose the high-performance Slot -1 processor or the inexpensive PPGA Celeron processor according to the system requirements and the price/performance comparison of the two kinds of processor.

PROCESSORS
SECC2 Pentium III up to 850MHz(100MHz FSB), Pentium II
FC-PGA Pentium III up to 850MHz(100MHz FSB)
Celeron PPGA up to 533MHz / FC-PGA up to 800MHz

CHIPSET
Intel 440BX

MEMORY
Three 168-pin DIMM
Maximum: 768MB

SYSTEM BIOS
Award BIOS

I/O INTERFACE
Supports Plug and Play function
One - EPP/ECP mode parallel port
Two - 16550 high-speed serial I/O ports (2 connectors)
Supports 360K~2.88M Byte, 3 Mode FDDs or LS120
Dual PCI IDE interfaces - supports four IDE devices

(PIO mode 4, DMA Mode 2, Ultra DMA 33)
PS/2 keyboard and PS/2 mouse connectors
ATX Power Supply Connector
Audio Ports(Line-in, Line-out, Mic-in, CD-in and game port)
Two sets of USB connector
Other ports:
IrDA Cable header
Green, HDD, power indicator LED headers
CPU and Case Fan headers
LAN Card Wake Up/Internal Modem Ring Wake-Up headers

RTC & BATTERY
Intel 82371EB (PIIX4E) included 256 bytes CMOS SRAM

FORM FACTOR & LAYERS
ATX (305mm*220mm)

zu finden unter anderem hier

greets
Pedro

NL223

RoHS-konform

Registered: Mar 2002
Location: nähe Linz
Posts: 7688

21.11.2003 - 15:45

falls du meinst du kannst ebide gleichzeitig reinstecken -> sicher nicht

Garbage

Elder
The Wizard of Owls

Registered: Jul 2000
Location: GR.ch|TI.ch
Posts: 11565

21.11.2003 - 17:18

und so selten is das auch nicht, gabs von mehreren herstellern.

Viper780

Elder
Er ist tot, Jim!

Registered: Mar 2001
Location: Wien
Posts: 51630

21.11.2003 - 17:24

is a typisches billig board hab so eins vo soltek oder tyan oder so....
gabs mit den verscheidensten chipsätzen (imho auch vo Via und SIS)

xdfk

pädagogisch wertvoll

Registered: Sep 2000
Location: Graz
Posts: 6441

22.11.2003 - 09:35

ich hab so eines von tyan mit via chipset. is ganz praktisch wenn man alte cpus hat...

Longbow Here to stay Registered: Feb 2003 Location: Homeoffice Posts: 5568	21.11.2003 - 11:28 also ich hab auf ebay auch eine mb kuriosität gefunden; laut beschreibung müsste man ja einen katmai und noch eine cumine reinpappen können; müssen die dann auf dem selben fsb laufen? schon oder. http://cgi.ebay.de/ws/eBayISAPI.dll...;category=23162
Pedro Vereinsmitglied ------------------------- Registered: May 2000 Location: Europe Posts: 3908	21.11.2003 - 12:15 The P6BXT-A+ is a full-sized ATX board measuring 305x220mm and using 4-layer printed circuit board. The P6BXT-A+ has a special design feature so that it includes a Slot-1 processor slot and a PPGA (Plastic Pin Grid Array) Celeron Socket-PGA370 processor socket. This feature means that you can install the mainboard with either a Pentium-III cartridge, a Pentium-II cartridge, the SEPP (Single Edge Processor Package) Celeron cartridge, or one of the new generation PPGA Celeron cartridges. In addition, the mainboard supports a 66 MHz memory bus, or a 100 MHz memory bus, so you can use inexpensive 66MHz memory chips, or higher-performance PC-100 memory chips. The board is installed with an integrated PCI-3D sound system and has a full suite of I/O ports. Seven expansion slots are available for system development and hardware monitoring is supported. This board allows complete flexibility. System integrators can choose the high-performance Slot -1 processor or the inexpensive PPGA Celeron processor according to the system requirements and the price/performance comparison of the two kinds of processor. PROCESSORS SECC2 Pentium III up to 850MHz(100MHz FSB), Pentium II FC-PGA Pentium III up to 850MHz(100MHz FSB) Celeron PPGA up to 533MHz / FC-PGA up to 800MHz CHIPSET Intel 440BX MEMORY Three 168-pin DIMM Maximum: 768MB SYSTEM BIOS Award BIOS I/O INTERFACE Supports Plug and Play function One - EPP/ECP mode parallel port Two - 16550 high-speed serial I/O ports (2 connectors) Supports 360K~2.88M Byte, 3 Mode FDDs or LS120 Dual PCI IDE interfaces - supports four IDE devices (PIO mode 4, DMA Mode 2, Ultra DMA 33) PS/2 keyboard and PS/2 mouse connectors ATX Power Supply Connector Audio Ports(Line-in, Line-out, Mic-in, CD-in and game port) Two sets of USB connector Other ports: IrDA Cable header Green, HDD, power indicator LED headers CPU and Case Fan headers LAN Card Wake Up/Internal Modem Ring Wake-Up headers RTC & BATTERY Intel 82371EB (PIIX4E) included 256 bytes CMOS SRAM FORM FACTOR & LAYERS ATX (305mm*220mm) zu finden unter anderem hier greets Pedro
NL223 RoHS-konform Registered: Mar 2002 Location: nähe Linz Posts: 7688	21.11.2003 - 15:45 falls du meinst du kannst ebide gleichzeitig reinstecken -> sicher nicht
Garbage Elder The Wizard of Owls Registered: Jul 2000 Location: GR.ch\|TI.ch Posts: 11565	21.11.2003 - 17:18 und so selten is das auch nicht, gabs von mehreren herstellern.
Viper780 Elder Er ist tot, Jim! Registered: Mar 2001 Location: Wien Posts: 51630	21.11.2003 - 17:24 is a typisches billig board hab so eins vo soltek oder tyan oder so.... gabs mit den verscheidensten chipsätzen (imho auch vo Via und SIS)
xdfk pädagogisch wertvoll Registered: Sep 2000 Location: Graz Posts: 6441	22.11.2003 - 09:35 ich hab so eines von tyan mit via chipset. is ganz praktisch wenn man alte cpus hat...