Erster MACH II review... :rolleyes:

.... auf italienisch

Auf was ich so rausraten konnte (Zahlen san eh gleich) is sie ned stärker als die mach I...

http://www.hwupgrade.it/articoli/841/1.html

na super, die wichtigste is immer noch die Kühlstärke, dann kommt alles andere.

Für Neukunden is die mach II des beste, für mach I Besitzer is die Mach II nach diesem review unnötig.

Ich hab den wichtigste Teil maschinell übersetzen lassen.
Und um die 0 Grad bei Vollbelastung ist genau das selbe was die Mach I auch kann, siehe hier:

Zitat

Configuration during the test: with the cpu pentium 4 3 Ghz (bus 800 Mhz) was planned, in overclock to 4 Ghz, a voltage Choruses of 1.75V, with voltage THE/OR of 1.65V and voltage DDR of 2.75V. Also ascending of V Choruses it did not be possible to maintain full operating stability to frequency of clock more raised, I mark that that was the limit for the special one cpu. The temperatures of operation, to full load with Hyper-Threading qualified, touched from panel of hardware monitoring of the card mother a value of -2 degree centigrade. In idle fashions, to 4 Ghz, the temperature comes down to -21 degree centigrade about. The sensor of hardware monitoring of the card mother Abit IC7-G utilzizata in the test suspect that you for lack, as I retain that the real temperature of the Choruses of the cpu was quite above to zero you accept to full load. likely this behavior is justified also from the coibentazione of the inside part of the Socket 478 carried out during the test, hears to avoid possible problems of condenses.

Natülich muß man noch andere reviews abwarten, aber bis jetzt schaut es schlecht aus wenns um MEHR POWER geht