"Christmas - the time to fix the computers of your loved ones" « Lord Wyrm

Benq Joybook 7000 Infos & Reviews

BiOs 11.09.2004 - 12:53 277868 1656 Thread rating
Posts

Alp.traum

Bloody Newbie
Registered: Jan 2006
Location: Germany
Posts: 4
Ok vielen Dank für die Antworten. Werde mal meine LEGO-Sammlung rauskramen müssen. Bis ich die gefunden habe wende ich mich an den Support. Ich werde berichten wie es weitergegangen ist!

Lone Ranger

Bloody Newbie
Registered: Jul 2005
Location: Jolly ol' German..
Posts: 19
Moin,
jetzt habe ich auch mein erstes Problem mit meinem Joybook 7000.G30! Habe neulich das Display mit Rogge Screenclean gereinigt und dabei ist mir ein kleiner schwarzer Stecknadelgroßer Punkt aufgefallen, der nun nicht mehr weggeht. Das sieht aus, als wäre da ein Loch im Display (Wie Steinschlagschaden bei einer Windschutzscheibe, so sieht das aus).
Hatte so etwas schon jemand. Das Gerät ist nicht runtergefallen und wurde auch nicht mit Messer und Gabel drangsaliert.
Ausserdem wackelt die Plastikabdeckung rechts neben dem Displayschanier.
Was meint ihr? Ist das ein Fall, den man beim Support melden kann/soll? Kaufdatum war der 24.07.05!
Danke im Voraus für eure Tipps.

So long
Lone Ranger

.EE

Bloody Newbie
Registered: May 2006
Location: Estonia
Posts: 10
Hi everybody,

Sorry that I write in English, but I understand German well.
You have a great thread here! I just started to read trying to gind an
answer to my question. Maybe someone can help me?

I would like to upgrade the processor on the laptop of my friend
(freundin :)). She is a very happy user of Joybook 7000 since October 2004! However, the power of 1,6GHz processor is not anough for her
massive scientific calculations. I want to replace her processor with
PM 755 2GHz. We have already upgraded RAM and replaced the slow Fujitsu
hard disk with fast and silent Samsung.

I read some instructions on how the processors are replaced, how Arctic Silver is applied etc. However, I am looking for some more specific guide specific to Joybook 7000.

Do you know if there are dissassembling pictures or instructions burried somewhere in thie thread? Did someone actually try alread to upgrde the processor? I hope that Benq's BIOS applies to all processors of Pentium M7x5 family, does it?

Greetings from .EE!





Is there someone

ica

hmm
Avatar
Registered: Jul 2002
Location: Graz
Posts: 9802
no there is no guide with pictures in this thread. but even if the bios recognizes the cpu I'm not sure if the fan/cooler can handle the pentium m-755.

.EE

Bloody Newbie
Registered: May 2006
Location: Estonia
Posts: 10
Zitat von iCA-
no there is no guide with pictures in this thread. but even if the bios recognizes the cpu I'm not sure if the fan/cooler can handle the pentium m-755.
I don't worry about the cooling system. First, it looks to be very well designed. Second, P-M 755 will work almost 20% undervolted (with NHC),
so that even at the full load it will produce less heat that P-M 725
in the standard regime when it is not undervolted. ;)

Maybe some one will show up here who has alread done the processor upgrade?

To all - Please reply in German, so that we can preserve the thread uniformity.

creepee

Little Overclocker
Avatar
Registered: Oct 2004
Location: Berlin
Posts: 67
Hey .EE!

Even if theoretically a PM 755 would work in it you will not be able to get it in. See, the CPU is not socketed. You cannot exchange it like in a desktop computer.

Oh, in Deutsch.
Selbst wenn ein PM 755 theoretisch im Joybook funktionieren würde, könntest Du ihn praktisch nicht einbauen. Der Prozessor sitzt nicht in einem Sockel, sondern ist fest mit dem Mainboard verlötet. Keine Chance.

Ganz davon abgesehen, wäre für die wissenschaftlichen Berechnungen Deiner Freundin sicherlich ein moderner Desktoprechner weitaus besser geeignet als dieses legere 2-Kg-Notebook.



Mal ne ganz andere Frage:
Ich würde gern das DVD-Laufwerk austauschen. Es liest nicht mehr alles DVDs. Die schnellen Support-Leute von BenQ empfehlen mir zwar, es einfach zur Reparatur abholen zu lassen, aber ich habe auch nur mit manchen DVDs Probleme. Außerdem habe ich den Kaufbeleg nicht so schnell zur Hand und brauche das Joybook wirklich jeden Tag. Daher würde ich gern selbst eins kaufen und einbauen, das scheint ja eigentlich ganz einfach zu gehen. Es gab hier zwar schon vor einer Weile das Thema, aber ne wirkliche Empfehlung gab's bisher noch nicht.

Welches Laufwerk kann ich kaufen? tia




creepee.

pointat

Bloody Newbie
Registered: Feb 2005
Location: Germany
Posts: 29
Ich hab schon oft von Problemen mit DVD-Laufwerken in Notebooks gelesen. Bis hat meins aber noch jede DVD gelesen, auch wenn es dabei merkwürdige Geräusche von sich gegeben hat. Viel mehr stört mich, dass ich es bisher nicht geschaft habe DVDs mit 4x zu brennen, was ja eigentlich möglich sein soll.

Mittlerweile ist ein anderes Problem bei meinem Joybook (November 2004) aufgetaucht: Die Restanzeige des Akkus stimmt hinten und vorne nicht mehr. Die Anzeige ist nach 2 Stunden auf 0% (Display auf dunkelster Stufe, Wlan an, Prozessor bei 600 Mhz @ 0,7V), das Notebook läuft aber trotzdem noch eine Stunde weiter. Der Akku-Verschleiß beträgt laut Notebook Hardware Control 35%. Da es ja leider keine Funktion im Bios gibt den Akku zu kalibrieren, habe ich versucht den Akku komplett leer laufen zu lassen und anschließend bei ausgeschaltetem Gerät über nacht zu laden - ohne Erfolg. Hat da jemand ne Idee?

MDG

Big d00d
Avatar
Registered: Jan 2005
Location: Germany
Posts: 136
Zitat von pointat
Ich hab schon oft von Problemen mit DVD-Laufwerken in Notebooks gelesen. Bis hat meins aber noch jede DVD gelesen, auch wenn es dabei merkwürdige Geräusche von sich gegeben hat. Viel mehr stört mich, dass ich es bisher nicht geschaft habe DVDs mit 4x zu brennen, was ja eigentlich möglich sein soll.

Mittlerweile ist ein anderes Problem bei meinem Joybook (November 2004) aufgetaucht: Die Restanzeige des Akkus stimmt hinten und vorne nicht mehr. Die Anzeige ist nach 2 Stunden auf 0% (Display auf dunkelster Stufe, Wlan an, Prozessor bei 600 Mhz @ 0,7V), das Notebook läuft aber trotzdem noch eine Stunde weiter. Der Akku-Verschleiß beträgt laut Notebook Hardware Control 35%. Da es ja leider keine Funktion im Bios gibt den Akku zu kalibrieren, habe ich versucht den Akku komplett leer laufen zu lassen und anschließend bei ausgeschaltetem Gerät über nacht zu laden - ohne Erfolg. Hat da jemand ne Idee?


Mein Akku Verschleiß steht auch schon bei 15% bei ca. 10 Ladevorgängen. Denke NHC liest die Werte falsch aus.

MDG

.EE

Bloody Newbie
Registered: May 2006
Location: Estonia
Posts: 10
Zitat von creepee
Hey .EE!
Selbst wenn ein PM 755 theoretisch im Joybook funktionieren würde, könntest Du ihn praktisch nicht einbauen. Der Prozessor sitzt nicht in einem Sockel, sondern ist fest mit dem Mainboard verlötet. Keine Chance.

Some notebooks do have sockel and the processors can be upgraded.
It is not only desktop specific operaton.
If you know for sure that Benq has soldered the processor to the motherboard (what a bad boys!), I will have to forget about it.
Are you sure about it? Have you disassembled JB7000 yourself, or
you have some other source of information?

My problem is that my girlfriend don't want to open her holly notebook
unless I convince her that everything will work fine. :)

Thanks for your reply.
Bearbeitet von .EE am 28.05.2006, 17:46

MDG

Big d00d
Avatar
Registered: Jan 2005
Location: Germany
Posts: 136
Ich habe BenQ eine Email geschrieben, in der ich nachgefragt habe, ob man die CPU wechseln kann, und welches die maximale CPU wäre. Folgendes wurde mir geantwortet:

Sehr geehrter Herr xxxxxx,

eine Aufrüstung ist auf maximal 1,7Ghz möglich. Alle höheren CPU's benötigen einen neueren Chipsatz, da der Bustakt angehoben und die Architektur geändert wurde.

Mit freundlichen Grüßen
Christine Kopp

BenQ Serviceline

.EE

Bloody Newbie
Registered: May 2006
Location: Estonia
Posts: 10
Zitat von MDG
Ich habe BenQ eine Email geschrieben, in der ich nachgefragt habe, ob man die CPU wechseln kann, und welches die maximale CPU wäre. Folgendes wurde mir geantwortet:

Sehr geehrter Herr xxxxxx,

eine Aufrüstung ist auf maximal 1,7Ghz möglich. Alle höheren CPU's benötigen einen neueren Chipsatz, da der Bustakt angehoben und die Architektur geändert wurde.

Mit freundlichen Grüßen
Christine Kopp

BenQ Serviceline

Thank you very much!

However, it seems that the reason given is not very competent because
they say that the FSB will rise if you use the CPU with more than
1,7GHz ("da der Bustakt angehoben ... wurde"). I cannot imagine how it is possible with the standard Intel chipset. It is not the processor
which defines the FSB clock!

Meanwhile, I heard that it is mechanically possible to replace the processor. Someone had a brief look inside his JB7000 under the keyboard. By the way, onee need to descrew only 5 screws
in order to do that:
1) the one which fixes the optical drive,
2) 3 smaller ones which appear after you take out the optical drive,
3) the one which is covered by the warranty sticker.

Unfortunately, those contradictory peaces of evidence are still not sufficient to convince my girlfriend to agree that I make a processor upgrade for her. :rolleyes: So that I am still searching for the relevant information. :bash:
Bearbeitet von .EE am 03.06.2006, 22:17

Joe_the_tulip

Moderator
banned by FireGuy
Avatar
Registered: Mar 2003
Location: Wien
Posts: 16344
I guess the Benq woman was talking about the Banias Core and mistaking the Dothan for a Sonoma.

Therefore I am sure, that if Dothans work, the biggest, the 765 with 21x100Mhz will work too. Although you might want to undervolt it, for the sake of your notebook's cooling system. And apply some proper thermal paste - maybe a liquid metal one!

.EE

Bloody Newbie
Registered: May 2006
Location: Estonia
Posts: 10
This is exactly what I plan to do if I am to replace 1,6GHz processor with 2.00GHz: undervolting + coollaboraty liquidpro
thermal paste!

noosel

Bloody Newbie
Registered: Oct 2004
Location: Mönchengladbach
Posts: 10
Hi Leute! War ja ewig nicht mehr hier. Klasse, dass es den Thread immer noch gibt!!!

Mein joybook aus der November 04 Kollektion läuft immer noch tadellos. Habe letztens noch HL2 drauf gedaddelt und auch sonst fallen mir nur minimale Verschleißerscheinungen auf.

Alles in Allem muß ich nach 1 1/2 Jahren intensiver Nutzung sagen, ein guter Kauf!!!

Das neue S73 scheint auch wieder ein tolles Gerät zu sein. Wenn dvbt funktioniert ist es in der Preisklasse wohl konkurrenzlos.

Kleine Frage noch:

Wenn ich die Festplatte, z.b. zwecks Verkauf, lösche, kann ich dann mit der mitgelieferten CD oder mit einer Original-CD und der Seriennummer auf der Unterseite des Joybooks, Windows wieder draufspielen? Oder bekomme ich da Probleme mit den ganzen Benq-Treibern und -Software?
Hat doch bestimmt von euch schon mal einer das System neu aufsetzen müssen, oder?

Gruß noosel

CYBERSONIC

Bloody Newbie
Registered: Jan 2005
Location: Germany
Posts: 20
Mit Treibern und Software gibt es auf jeden Fall keine Probleme. Ich habe mein Joybook direkt nach dem Kauf komplett platt gemacht (inklusive versteckter Partition) und mein eigenes XP Professional installiert, keinerlei Probleme.
Kontakt | Unser Forum | Über overclockers.at | Impressum | Datenschutz